• The world's smallest milling machine for dental technicians

    The DWX-4 makes digital technology for the production of dental prostheses available for starters, and small and medium-sized labs. The unit offers an affordable and user-friendly platform with the same degree of accuracy as the conventional models at only half the size. With this unit, you can make prostheses such as crowns and bridges in commonly used materials such as zirconium, PMMA and wax.

  • No experience required

    The DWX-4 has been designed so that even those who are using a digital milling machine for the first time will be able to make accurate prostheses smoothly. The process is very simple. After installing the material and the milling tools in the machine, you start with the virtual operating panel (VPanel). With this intuitive software, you configure the unit in a very simple way. The VPanel then sends the CAM data to the DWX-4 and the production of the prosthetics starts.

  • Professional unit

    In addition to the four axes (XYZ axes and a rotating axis), the DWX-4 has an automatic tool changer (ATC) for two tools. The tools are changed without interrupting the production process.

  • User friendly

    The DWX-4 has several functions that guarantee smooth operation. They include a status light that shows the progress of each job. And a system that checks the lifespan of the tool and warns you automatically when a tool should be replaced. An air blower prevents dust from building up in the milling machine. The negative ion generator eliminates the build-up of dust while milling PMMA and keeps the milling area clean. The DWX-4 also sends you an e-mail when there is a malfunction or when a job is done.

  • Open system for easy integration

    You can integrate the compact DWX-4 into your current production process easily. The unit can be used without any difficulty in combination with the scanner, CAD/CAM software and tools of your choice. The authorised Roland dealers offer a made-to-measure total solution to start-ups.

  • Roland Easy Shape

    Please visit the dedicated website about our digital dental solution.

    Visit website

  • DWX-4 1

    Request a demo

    Get a detailed demonstration of this unit at one of our dealers or in our own demo room.

  • DWX-4 2

    Contact us

    Please send us your questions. We would be happy to assist you.

Cuttable Material Zirconia (pre-sintered), Wax, PMMA
Loadable workpiece shape Block Width x Depth: 76×38, Height: 16 to 22 mm
PIN type Width x Depth x Height: Maximum 85 x 40 x 22 mm
Operating speed XYZ axis: 6 to 1800 mm/min. 
Spindle motor Brushless DC motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A: ±360°
Number of tools housed 2
Attachable tool Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air 0.02 to 0.2 MPa
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set RML-1, NC code
Power requirements AC100 to 240 V ± 10 %, 50/60 Hz, 0.8 to 0.4 A (overvoltage category II, IEC 60664-1)
Power consumption Approx. 70 W
Operating noise During operation: 70 dB (A) or less (when not cutting)
During standby: 40 dB (A) or less
External dimensions Width x Depth x Height: 340×365×405 mm
Weight 22 kg 
Installation Environment Indoor Use, altitude: up to 2000 m
Temperature: 5 to 40 °C
Relative humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-Term Temporary Overvoltage: 1440 V
Long-Term Temporary Overvoltage: 490 V
Included items Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.